Friday, April 11, 2014

Sweet Lil Summer Halter ~FREE PATTERN~


I received this yarn in the mail the other day. I had never used it before but have been looking at cottons for some projects I have planned for summer. If you havent checked out Lion Brand Cotton Ease ooooohhhhhh I beg you to do so. It has give, and beauty and texture that made me swoon and wish I had ordered more…. and so I did, but I digress :)) It seems to be THE PERFECT YARN for this project. And this project seems to be a gateway pattern to soooooo many other beautiful possibilities …..
This polka dot fabric I picked up at Walmart. It was the last lil sneeblit on the end of a bolt…. cost me $2.00
The beautiful snake skin like knit fabric I got from one of my favorite, ok strike that, definitely my favorite online fabric store….. www.fabric.com ….. you can find the exact fabric here…..
The beads I just bought at walmart and the whole look I think cost less than $10.00. My teen daughters love this look and I have to say I think even this plus sized mama of seven is gonna get in on this. I think a maxi dress with a  nice shrug and summer time here I come va-va-voom :P
I made the first of 3 videos and you can find it HERE….. Im still really soooooo not very good at them sigh….. practice practice practice. Also come say hi over on myFacebook page Strings and Things :)
Grab your stuff and lets get started!
Made a correction/adjustment to the back strap…. my older daughter wanted it tighter and she is a 36C so after fitting her these are the numbers I came up with. Please measure on yourself as each persons crochet tension and measurements are different for correct fit*
Materials:
Lion Brand Cotton Ease (1 skein) A scrap of color yarn for tie in the front
Size H hook
Beads (optional)
Scissors
Blunt eye needle
Large eye embroidery needle that can pass through beads on the ends of the ties like in the picture (optional)
This Pattern fits a 36-38 C comfortably
Chain 11
Row 1: SC in each stitch across (10 stitches)ch 1 turn
Row 2: SC in each st across (10 st)ch 1 turn
Row 3: SC in each st across (10 sc)ch 1 turn
Row 4: SC in each st across (10 st)ch 1 turn
Row 5: SC in each st across (10 st)ch 1 turn
Row 6: SC in each st across (10 st)ch 1 turn
Row 7: SC in each st across (10 st)ch 1 turn
Row 8: SC in each st across (10 st)ch 1 turn
Row 9: SC in each st across (10 st)ch 1 turn
Row 10: SC in next 9 st, 3 sc in last st, pivot work on its side and begin working down the edge of the crochet without turning. (21 st)
Row 11: Ch 1 turn. SC in each st around (21 st)
Row 12: Ch 1 turn. SC in each st across (21)
Row 13 Ch 1 turn. SC in each st across (21)
Row 14: Ch 1 turn. SC in each st across (21)
Row 15: Ch 1 turn. SC in each st across (21)
Row 16: Ch 1 turn. SC in each st across (21)
Row 17: Ch 1 turn. SC in each st across (21)
Row 18: Ch 1 turn. SC in each st across (21)
Row 19: Ch 1 turn. SC in each st across (21)
Row 20: Ch 1 turn. SC in each st across (21)
Fasten off.
Repeat for second cup of halter and do NOT fasten off on last row.
Joining the cups and the back strap…. please measure yourself….. you may be different than these measurements. See below on how to find your size.
Row 21: Ch 1 and turn. SC in each of the next 20 stitches. SC through BOTH end stitches joining the two cups. (41 stitches across the front) Next chain 55 stitches and join with a slip stitch to end of first cup. Ch 1.  This begins working in the round.
Rnd 1: SC in each stitch around.
Rnd 2: Ch 1, sk next st, sc in next st. Ch 1, sk next st, sc in next st….. all the way around. SC in last st before first ch 1 space.
Rnd 3: 2 sc in each ch 1 space around. Sc in next 2 stitches
Rnd 4: SC in each stitch around.
Rnd 5: Sc in each stitch around Slip st into next 2 stitches and fasten off leaving a tail for weaving in.
Across the back and up the sides of cup….
Beginning on the top of the band where the left cup and band join with right side of halter facing you, join new yarn in first band stitch. Sc in each stitch across top of back band and then in each stitch up the side of the right cup to the top. I like very long ties for decorative purposes so I chained 80 st…. but feel free to make them shorter or longer. Just make a note of the number of chains so you can repeat that same number on the other cup strap. fasten off leaving a 10 inch or so tail if you are going to have beads at the ends, if not cut tail short.
At the top of the right cup join new yarn in space made from last sc made at the top of the cup (where your chains for your long tie begin) and sc in each stitch down the inside of right cup to the V where it joins with the left cup. Sc all the way up the inside of left cup and at the top chain your tie. Again I chained 80 st because I like a long tie for decorative purposes but put the same amount of chains you chose for your first cup.
At the top of the left cup join new yarn in space made from last sc made at the top of the cup (where your chains for your long tie begin) and sc in each stitch down the outside of the left cup. Sl st into first 2 sc of the back band and tie off.  Weave in all ends, except the ends on the ties if you are beading them.
Halter is finished except for embellishments :)
Band Tie * I made my tie very long for decorative reasons, you can make yours what ever length makes you smile *
If you are beading the end leave a 10 inch tail and using a contrasting color chain 190 and fasten off leaving a 10 inch tail.
Beginning at the front center ch 1 open spaces (the 2 center ch 1 spaces, one left, one right) begin weaving by going into the ch 1 left space and weaving in and out all the way around coming out back at the front right ch 1 space. Tie.
The only thing left to do to the halter is put beads on the ties if you choose to do that, if not thats ok too :)
Attaching the bottom fabric……
For the polka dot top I used a very thing silky light weight rayon fabric. I used my sewing machine to turn the ends as this type of fabric can fray awful but is way too pretty to pass up. For the grey snake skin dress I used a light weight knit fabric as knit doesnt fray and so finishing isnt needed like in other materials. Kinda like when you cut a tee shirt…. no hemming needed. Of course you can hem for a more finished look, but I wanted to show a very basic version just to give those who do not ave machines or the desire to sew a great alternative also :)
Measure the fabric 1.5 times bigger around that the band measurement of halter. With right sides together and a sewing machine or needle and thread in matching color to fabric, sew a simple running stitch up the length of the fabric (bottom edge to top edge) forming a “tube”.
With a large eyed embroidery needle thread same yarn as halter and make as many running stitches around the top of the tube as you have all the way around the bottom of the halter about 1/2 to 1 inch from the top edge of the fabric…..eg…. if you have 120 st on the bottom of the halter, evenly space 120 running stitches around the fabric edge. You should have visible to you 120 st on the right side of the fabrics edge *this was just and example*
For this pattern I will do 106 running stitches visible to me on the right side of the fabric.
If you dont know how to do a running stitch please go here and check this video out :)
After you have completed your running stitches take the left over yarn off the needle and use it to join with the beginning edge stitch on the bottom of your halter where you previously fastened off. Drawing up the yarn with your hook that was on the needle used to make your stitches. Begin to sc in each of the halter stitches and each corresponding run stitch space on the fabric. This will draw them up close under the halters edge and secure them beautifully and gather your fabric at the same time evenly …. Join with a slip stitch to beginning stitch and fasten off…..
weave in all the ends and you are done :)
Note on changing sizes…..
You want this measurement for the cup to be “tight”:
Measure across the fullest part of one cup (1 breast) and devide in half. In my pattern the cup size was 7.25 inches. I divided that in half and came up with 3.5 inches. Chain as many stitches that will equal that length +1 for turning. So mine was 10 Stitches +1.
Another example…. say your cup measurement at its fullest was a 9 inches. Divide that in half, so 4.5 inches. Chain enough stitches to measure 4.5 inches and then +1 for turning.
Do as many rows high as you have stitches long. For me this was 10 rows for 10 sc stitches. This makes he square. On the LAST row you want to put 3 stitches in the very last st and pivot just like in the above directions working down the side.  Say you had 12 rows, you would place 3 stitches in the last stitch of row 12, pivot and continue to stitch down the side for 11 more stitches and then continue on for the pattern.
Changing back halter strap measurement:
Measure with a soft tape measure around the back from outer edge of breast, around the back, to outer edge of breast. Now when you get to that section in above directions chain as many stitches as YOU need to obtain YOUR measurement. Continue on in pattern.
Please note I am NOT a professional pattern writer, just  agurl who likes to play with yarn :P If you do see something that you have a question on, please feel free to let me know so I can help and/or make a correction.

30 comments:

  1. I am excited to try this! I have a sharp crochet hook (allows you to crochet thru fabric) I have been wanting to use and finally the perfect pattern.

    ReplyDelete
    Replies
    1. Sandra you will love this top/dress I promise :) If you do make one please give me a shout, Id love to see it <3

      Delete
    2. Hi Sandra, I was curious which sharp crochet hook you have. I wanted to get one :)

      Delete
    3. Sherry I have the edgit piercing crochet hook. Crochet Supernova, I will definitely share a pic, not of it on me lol but of the completed project. I am actually about to head to walmart to get the fabric. I am going through a hippie phase (actually have been for years) and they have some really cool material that is perfect for my taste :D

      Delete
  2. Gorgeous....yes please do a video so we can see how it is all put together....believe me I need help...lol Thanks Hanna for all you do....You Rock!

    ReplyDelete
    Replies
    1. I think I will do a video, It will have to wait until after the weekend tho, this mama has seven messy kidlets and a house that needs a good old fashioned springtime scrubbin :P

      Delete
  3. Thank you Hanna. I will be definitely following your blog. You seem like an amazing mom and designer! ;) happy crocheting!

    ReplyDelete
  4. I've been wanting to make a bathing suit top and think I'm gonna give this a try. That is if I can figure out how to make it a "A" cup without messing it up.

    ReplyDelete
    Replies
    1. You can do it! If you need any help with the measurements let me know and I will be happy to help out :)

      Delete
  5. Can't wait to try this pattern. Having a video would be great help to. Thank you for sharing the pattern!!

    ReplyDelete
  6. This is beautiful! I'm going to make one for my daughter :)
    question....do you allow people to sell completed projects of your patterns?

    ReplyDelete
    Replies
    1. Well, I have this view......they arent my products when you are the one making em right? lol of course sell sell sell! What ever your creative self comes up with YOU own and no one else..... I cant wait to see what you make :)

      Delete
  7. Hanna thank you, I love the combination of fabric and yarn/thread. Looking forward to the video and learning from your projects. Haven't heard about "good old fashion spring cleaning" in years. I think my mother-in-law invented it.

    ReplyDelete
    Replies
    1. Thank you so much <3 I always dreaded the spring/fall clean growing up but now that I am a mom of 7 lil mess makers I can soooooooo see why I have to bite that bullet twice a year and git er done..... :)) My mom and your MIL must have been related :P

      Delete
  8. Thank you for sharing your pattern. I can't wait to try it.

    ReplyDelete
  9. Love the pattern and have already started making my own. Could I please get clarification though. The cup I am working on is square. At what point does it become a triangle?

    ReplyDelete
    Replies
    1. :) sure it becomes tri when you begin on the 10th row and sc the 3 into the end st and begin going down the side :) magic happens :P

      Delete
    2. Its an awesome pattern....incase I didnt tell ya....you rock Hanna!!

      Delete
  10. Hanna are you going to show on the video how to sew it on the sewing machine? I have a sewing machine but im not very good with it...its just a basic machine ive done a little with it but gave up cause i just dont get it...lol Im thinking maybe taking a class...would love to learn! Videos are such a blessing....<3 Thanks again Hanna!!

    ReplyDelete
    Replies
    1. I was going to do a part two that would be adding the fabric.... I did it without a sewing machine because I know not everyone is comfortable using one and it really is easy..... I have been thinking of teaching some simple sewing as well.... hand and machine.... :)

      Delete
  11. Hi Hanna,
    Love your video tutorial....Just finished the Halter Top...I had to add more rows to mine because I am a Full C-Cup, and 52 chains to the back....Now, I am having a little trouble with attached the fabric to the Halter top. I am following your instruction...I don't have a sewing machine so, what I did was hand hemming and I have my embroidery needle and yarn ready to hem around the fabric again, and then sc the the fabric and Halter top together.... Hope it's correct,if not let me know. Thanks.

    ReplyDelete
    Replies
    1. Mari you can attach what ever way gives you the result you like best :) some like machine, some like to blanket stitch the edge and attach there.... in this tut I did a running stitch and created as many stitches around with my yarn as there was stitches around on the halter bottom to crochet in.... then I just made my last row of sc right into both sets securing them together..... :) hope this helps

      Delete
    2. Yaay.....Hanna.....After posting this message, I read your instructions again and finished it......My Halter Top looks beautiful...thanks to you.....I am one Happy Hooker :-) If it's okay with you, I will send you a picture tomorrow. I am planning on doing another one, but this time I will incorporate more fabric...make a Halter Yop dress.

      Delete
  12. Hi. I am so gonna try this but I was wondering what if any thing used to not see thru bra part? I love the pattern. Thanks

    ReplyDelete
  13. Hanna thanks for sharing. Question I have for the first 10 row do you chain one after each row

    ReplyDelete
  14. How much fabric do you need? Approx. Pls

    ReplyDelete
  15. How much fabric do you need? Approx. Pls

    ReplyDelete
  16. How would I be able to measure for a A cup? Also, how much fabric for knee length?

    ReplyDelete
  17. How many stitches do u think a d cup would need to be? I have been fighting with patterns for 2 months trying to make a bathing suit top and have yet to finish it.

    ReplyDelete